Press Release · Atomic-6
Atomic-6 Tests New Space Armor® Technology to Protect Astronauts From 16,000 MPH Space Debris
Distributed by WebGuard Core · Originally issued via PR Newswire
In side-by-side hypervelocity tests, Space Armor® technology protection left a simulated torso visibly undamaged while a solid aluminum comparison left embedded fragments
MARIETTA, Ga., Nov. 20, 2026 — Atomic-6, a leading manufacturer of advanced composite structures, today announced results from a proof-of-concept experiment exploring whether its Space Armor® satellite debris shielding could help protect astronauts during spacewalks. In testing at Texas A&M University's Hypervelocity Impact Laboratory, a ballistic torso behind a Space Armor® Lite tile showed no visible damage or penetration following an impact at approximately 16,100 miles per hour. A comparison test using a solid aluminum plate, which simulates the protective technology used in current spacesuits, left fragments embedded in the torso.
The experiment evaluated both the shielding material and what reached the simulated body behind it, an important consideration for potential protection against micrometeoroids and orbital debris (MMOD).
"While spacewalking, my spacesuit was my one-person spaceship. Micrometeoroids and orbital debris were a constant concern, and better long-term protection is essential," said Commander Chris Hadfield, former commander of the International Space Station and Atomic-6 advisory board member. "These early Atomic-6 results are very encouraging, and further testing will help us understand whether this material could provide a much-needed layer of safety for astronauts working and living in space."
Comparing Protection Under Matching Test Conditions
Both configurations faced a 3-millimeter-diameter aluminum sphere traveling at approximately 7.2 kilometers per second, or about 16,100 miles per hour.
Atomic-6 mounted a hexagonal composite tile in front of a transparent ballistic torso containing simulated soft tissue and skeletal structures, supplied by Georgia-based Ballistic Dummy Lab.
For the comparison, testers substituted a 4-millimeter-thick solid aluminum plate, keeping the impact angle, shield-to-torso spacing, and mounting arrangement identical. Atomic-6 selected that thickness using NASA ballistic-limit equations, which engineers use to estimate whether a shield will be penetrated by a projectile of a given size and speed.
Inspection after the composite test found no visible marks or penetration in the torso and no visible bulging, cracking or material leaving the tile's rear surface. In the aluminum test, fragments became embedded in the simulated torso.
Side-by-side videos document the visible outcomes.
The comparison addressed a hazard known as rear-face spalling, in which an impact causes material to break away from the back of a shield and travel toward the person or equipment behind it. The aluminum test produced the type of secondary fragmentation Atomic-6 sought to evaluate against its composite material.
The aluminum control was a single solid plate, not a traditional Whipple shield, which uses separated bumper and rear-wall layers to disperse an incoming particle. The experiment did not compare complete spacesuits.
Exploring a Potential Spacesuit Application
Atomic-6 developed Space Armor® tiles as modular shielding for satellites. The Space Armor® Lite tile used in the experiment had a mass of 14 kilograms per square meter.
The experiment used a stationary ballistic torso, with no functioning spacesuit, pressure garment or life-support hardware. Its findings describe visible damage under the tested conditions; they do not establish injury outcomes, pressure retention, or readiness for use in space.
"Astronauts face extraordinary risks every time they venture into space, and the last thing they need is an unknown threat from debris traveling thousands of miles per hour," said Trevor Smith, CEO, Atomic-6. "We created Space Armor® to protect spacecraft, but protecting the people who risk their lives aboard them is an even greater mission. These early results give us a compelling reason to explore how we could make spacewalks safer, and there's nothing more important than helping to bring our astronauts home safely."
Atomic-6 plans additional tests involving curved shielding and different impact angles to more closely approximate the geometry of a chest or shoulder. Any future spacesuit application would also require evaluation of attachment points, mobility, pressure retention and performance in the thermal-vacuum environment.
The testing follows Space Armor® technology's first launch last month aboard Portal Space Systems' Starburst-1 spacecraft, carried by a SpaceX Falcon 9 rocket on the Bandwagon-5 rideshare mission.
The flight demonstration marks a milestone for the satellite shielding technology as Atomic-6 explores its potential to protect astronauts.
Media Contacts
Mike Petchenik
[email protected]
404-345-1358
Scott Merritt
[email protected]
770-778-4786
SOURCE Atomic-6
About Atomic-6
Atomic-6 designs, engineers and manufactures advanced composite structures for aerospace, hypersonics and defense applications. The company's proprietary manufacturing process optimizes fiber-to-resin ratios, reduces porosity and accelerates production cycle times. Its innovations include Space Armor® tiles, a next-generation orbital debris protection system, and Light Wing™, an advanced re-deployable composite solar array. Learn more at https://atomic-6.com.